ALUXA 26’

Length 7,9 m / 26 ft.

Smart for life

6 persons
on board
x 1 cabin
spacious area & king size bed
Berth
in salon
WC with shower
Galley, gas stove
60 liters
fridge
80 liters
water tank
42 liters
waste water tank

Smart quality

7,9 m / 26 ft.
hull length
2,53 m
beam
45 cm
draft over keel
90 cm
draft over the engine
230 cm
bridge dimension (without mast)
2 470 kg
dry weight with engine
400 liters
fuel tank
350 HP
maximum engine power
24 knots
cruising speed
40 knots
maximum speed
24-27 knots
at 3,600–4,000 rpm
1,3 l/km
Fuel consumption at cruise speed

Smart solution

electronic solutions
The up to date technologies &
Chartplotter Lowrence
Autopilot Lowrence
Radar Lowrence
Vhf radio
Solar panel 90 W
Webasto
heating system
Electric anchor
winch system
Aluxa 26’ Grand Configuration

BASE configuration

General features
Framework — aluminium alloy, 5 mm
Side, deck house — aluminium alloy, 4 mm
Cockpit deck, side decks, furniture elements — aluminium alloy, 3 mm
Fender
Buoyancy blocks
Stainless steel assembly materials
Finishing and components
Indoor painting
Hull exterior finishing — painted
Flooring in the deckhouse — Flexy teak
Finishing of the deck house and sleeping accommodation: marine vinyl + carpet flooring
Noise insulation of the hull — submersed part, accommodation sides and cabin up to the port-holes, deckhead
Antifouling coating
Customized design
Habitability and navigation
Captain’s chair — 1 pc.
Set of cushions for forward cabin
Set of cushions for lockers in cabin
Table in the cabin — veneer plywood, without cup holders
Customized design
Portholes and doors
Forward and side glazing: bonded tempered glass with sealed seams and windows — 2 pcs.
Observation aft door with the locking device
Opening hatches in the deck house, cabin
Opening port-holes in the forward cabin 2 pcs.
Steering control
Hydraulic steering system
Steering wheel - one post
Decorative cabling of hydraulics hoses
Fuel system
Aluminium fuel tank — 1 pc. 400 l.
Set of fuel hoses and filters
Stainless steel fillers and tank ventilation
Digital fuel gauge
Anchoring and mooring equipment
Set of aluminium mooring belaying cleats — welded aluminium belaying cleat (6 pcs.)
Forward and aft rings
Self-draining anchor locker
Automatic stabilization system
Package "Anchor and mooring equipment" — anchor winch + bow thruster
Heating and ventilation system
Air heating system of the boat saloon — 4 kWt Webasto / Eberspacher
Heating system deflectors — WC, deckhouse, cabin, windshields
Galley unit
Cabinet with worktop and drawers — worktop, metal drawers without fillings with accessories
Sink - Gas Stove Unit — fresh cold water system, 80 liters tank, sink, one burner
Electrical equipment
Electric distribution system — for 3 acc, silicone wires
Batteries storages
Starting battery storage system (charging relay)
Lighting in the boat saloon — cock pit, deck house, cabin (8 pcs.)
Comfortable illumination of the boat saloon — LED strips
Switchboard – 2 pcs: — buttons made of anodized aluminium (12 keys or more)
Set of navigation lights — navigation lights, anchor light
Blue Sea fuse block
Electrical sockets 12V — USB socket 2 pcs.
Sound signal — single-tone horn
Windshield wiper for windscreen — pantograph-type
Bilge pumps — 2 pcs.
Shore power system 220V shore power socket + 220B charger
Stationary radio marine range: radio station + antenna
Accessories equipment
Aluminium welded transom at the aft guard (for extra engine)
Toilet — electrically pumping
Bars for mounting of transducers and trim-tabs
Galley block with cold water system and gas-stove
Deck wash — electric deck wash, twisted hose
Fenders storage system (4 pcs.)
Mooring lines storage system — lockers in the cock pit
Stainless aft ladder, guards integrated — 3 steps
Anodes
Set of 2 aft transformable couches into a sleeping accommodation

Boat exterior

Boat interior